Using The Subwoofer Output; Auto Eq; Enhancing Bass (Bass Booster); Using Sonic Center Control - Pioneer AVIC-Z150BH Operation Manual

Multimedia navigation receiver
Hide thumbs Also See for AVIC-Z150BH:
Table of Contents

Advertisement

Chapter
27
Customizing preferences
4
Each touch of
cut-off frequencies as follows:
50Hz
63Hz

Using the subwoofer output

The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2
Touch [Sub Woofer].
3
Confirm that the subwoofer output is
turned on.
p The default setting is On .
# If you touch [Off], the subwoofer output is
turned off.
4
Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
5
Touch
or
"Frequency(Hz)" to select cut-off fre-
quency.
Each time you touch
quencies are selected in the following order:
50Hz
63Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Touch [+] or [–] next to "Level" to adjust
6
the output level.
+6 to –24 is displayed as the level is in-
creased or decreased.
154
En
or
changes the
80Hz
100Hz
125Hz
next to
or
, cut-off fre-
80Hz
100Hz
125Hz

Enhancing bass (Bass Booster)

You can enhance bass sounds that are often
muted by driving noise.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2
Touch [Bass Booster].
3
Touch [+] or [–] to adjust the range from
0 to 6.

Using sonic center control

Sound that is suited for the listening position
can easily be created with this function.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2
Touch [Sonic Center Control].
or
to select a listening po-
3
Touch
sition.
p The larger the value of the range: Left 7 to
Right 7 setting, the greater the delay of
the speaker output.
p When Left is set, the left speaker output
is delayed. When Right is set, the right
speaker output is delayed.
Adjusting the equalizer curve
automatically (Auto EQ)
By measuring the vehicle s acoustics, the
equalizer curve can be adjusted automatically
to suit the vehicle interior.
WARNING
A loud tone (noise) may be emitted from the
speakers when measuring the vehicle s acous-
tics. Never perform the Auto EQ measurement
while driving.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-x950bhAvic-x850btAvic-x8510bt

Table of Contents