Connecting Your Ipod; Disconnecting Your Ipod; Startup And Termination; On First-Time Startup - Pioneer AVIC-Z150BH Operation Manual

Basic operation

Connecting your iPod

Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (sold sepa-
rately) is required for connection.
p For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
p Connection via a USB hub is not possible.
1 Check that no USB storage device is
connected.
2 Connect your iPod.
USB interface cable for iPod

Disconnecting your iPod

% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.

Startup and termination

1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p To protect the LCD screen from damage, be
sure to touch the touch panel keys only
with your finger and do so gently.
2 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.

On first-time startup

When you use the navigation system for the
first time, select the language that you want to
use.
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2 Touch the language that you want to
use on screen.
3 Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
Chapter
02
19
En