Selecting The Video For The Rear Display; Setting The Anti-Theft Function - Pioneer AVIC-Z810DAB Operation Manual

TIPS
• Different settings can be stored for each video source.
• When a video is viewed in wide screen mode that does not match its original aspect ratio, it may
appear different.
• The video image will appear coarser when viewed in [Zoom] mode.
NOTES
• Image files can be set to either [Normal] or [Trimming] in wide screen mode.
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake.

Selecting the video for the rear display

You can choose either to show the same image as the front screen or to show the
selected source on the rear display.
NOTES
• Video files on the external storage device are not available as a source for the rear display when
[Apple CarPlay] is activated.
• Video files on the external storage device are not available as a source for the rear display when
[Android Auto] is activated in [Smartphone Setup].*
* AVIC-Z910DAB/AVIC-Z810DAB
1
Press then touch .
2
Touch [Rear].
3
Touch the source you want to show on the rear display.
[Mirror] The video on the front screen of this product is output to the rear display.
NOTE
Not all videos or sounds can be output to the rear display.
[DVD/CD] The video and sound of a disc are output to the rear display.
NOTE
Compatible video types are DVD-V, Video-CD, DivX, MPEG-1, MPEG-2, and MPEG-
4 only.
[USB1] The video and sound of the USB storage device is output to the rear display.
NOTES
• The port that supports the rear display will only be USB port 1.
• Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only.
[SD]* The video and sound of the SD memory cards are output to the rear display.
NOTE
Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only.
[AV] The video and/or sound of the AV input source are output to the rear display.
NOTE
The video image and sound are output only when [AV Input] is set to [Source]
(page 58).
74
En
[Source OFF] Nothing is output to the rear display.
* AVIC-Z910DAB/AVIC-Z810DAB

Setting the anti-theft function

You can set a password for this product. If the back-up lead is cut after the password is
set, this product prompts for the password at the time of next boot up.
Important
If you forgot your password, contact the nearest authorised Pioneer Service Station.
Setting the password
1
Press .
2
Touch then .
3
Touch 1, followed by 2, and then touch 3.
4
Touch [Set Password].
5
Enter the password.
5 to 16 characters can be entered for a password.
6
Touch [Go].
7
Enter a password hint.
Up to 40 characters can be entered for a hint.
8
Touch [Go].
If you want to change the password currently set, enter the current password and
then enter the new one.
9
Check the password, and then touch [OK].