Change Spin Speed / Select Rinse Hold; Set The Delay Timer/Soaking Duration - Electrolux EWF 1480 User Information

Change Spin Speed / Select Rinse Hold

If necessary, change the spin speed for the final spin/
select RINSE HOLD (Spülstopp, Arrêt Cuvé Pleine):
Press the button Spin speed/RINSE HOLD (Spül-
stopp, Arrêt Cuvé Pleine) as often as necessary until
the display for the required spin speed or of RINSE
HOLD (Spülstopp, Arrêt Cuvé Pleine) lights up.
If RINSE HOLD (Spülstopp, Arrêt Cuvé Pleine) is
selected, the washing remains in the last rinsing
water and is not spun.
If you do not change the spin speed, the
3
final spin is automatically adapted depend-
ing on the washing program:
– COTTONS/LINEN
(Koch-/Buntwäsche, Couleurs)
– EASY-CARES/EASY IRON
(Pflegeleicht, Textiles Melanges/
Leichtbügeln, Fâcile à Repasser)
– DELICATES (Feinwäsche, Délicat
– WOOL (Wolle, Laine)/P (Handwasch) 1200 rpm
– SILK (Seide, Soie)/P (Handwasch)
The speed of the intermediate spin depends on the
selected program and cannot be changed.

Set the delay timer/soaking duration

Delay timer
The button DELAY TIMER (Zeitvorwahl, Départ
Différé) enables you to delay the start of a washing
program between 1 and max. 19 hours.
To do this, press the button DELAY TIMER (Zeitvor-
wahl, Départ Différé) as often as necessary until the
required start delay is shown in the Multi-display, e.g.
in the form 12h to delay the program start for
12 hours.
If 19h is displayed and you press again, the run time
of the washing program set appears (display in min-
utes, e.g. 125). In this state, the delay timer is not set.
Soaking duration
With the SOAKING (Einweichen, Trempage) button
pressed, you can extend the soaking duration with
the button DELAY TIMER (Zeitvorwahl, Départ
Différé) from 1 to max. 19 hours.
Without delay timer, the soaking duration is
3
approx. 1 hour.
1400 rpm
1200 rpm
1200 rpm
1200 rpm
15