Change Spin Speed / Select Rinse Hold - Electrolux EWF 1081 User Information

Change Spin Speed / Select Rinse Hold

If necessary, change the spin speed for the final spin/
select RINSE HOLD (Spülstopp, Arrêt Cuvé Pleine):
Change the spin speed
Continue pressing the spin speed/RINSE HOLD
(Spülstopp, Arrêt Cuvé Pleine) button until the indi-
cator for the desired spin speed is illuminated.
3 If you do not change the spin speed, the
final spin will be adjusted automatically
depending on the type of wash cycle:
– COTTONS/LINEN
(Koch-/Buntwäsche, Couleurs)
– EASY-CARES/EASY IRON
(Pflegeleicht, Textiles Melanges/
Leichtbügeln, Fâcile à Repasser)
– DELICATES (Feinwäsche, Délicat)
– WOOL (Wolle, Laine)/P (Handwasch) 900 rpm
The speed for the intermediate spin cycle is
dependent on the wash cycle selected and
cannot be altered.
Select RINSE HOLD
Continue pressing the spin speed/RINSE HOLD
(Spülstopp, Arrêt Cuvé Pleine) button until the RINSE
HOLD (Spülstopp, Arrêt Cuvé Pleine) indicator is illu-
minated.
If RINSE HOLD (Spülstopp, Arrêt Cuvé
3
Pleine) is selected, the washing will remain in
the final rinse water and will not be spun.
The washing will not be spun throughout the
entire wash cycle. As a result the cycle is a
very quiet one. RINSE HOLD (Spülstopp,
Arrêt Cuvé Pleine) is therefore especially
suitable for washing at night.
Note: The laundry remains lying in the water
until you drain or spin (see section "Washing
Cycle Ended"). After 18 hours however, it is
automatically drained and pumped.
16
1000 rpm
900 rpm
700 rpm