Water Inflow
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a VDE-
approved, complete set of hoses with fitted hose
screw connections offered by our Customer Service
is permissible.
– Sets of hoses in lengths of 2.2m, 3.5m and 5m
are available for washing machines without Aqua-
Control.
– Sets of hoses in lengths of 2.0m, 2.9m and 3.9m
are available for washing machines with Aqua-
Control.
Attention! Never cut into pieces in order to extend
the hoses!
Sealing rings are supplied either in the plas-
3
tic nuts of the hose screw connection or in
the enclosed pack. Do not use other seals!
1. Connect the hose with the angled connection to
the machine.
Attention!
– Do not lay the supply hose vertically downwards.
Rather, turn it to the right or left as shown in the
diagram.
– Only tighten the screw connection manually.
2. Connect the hose with the straight connection to
a water tap with a screw thread of R 3/4 (inches).
Attention! Only tighten the screw connection
manually.
3. By slowly opening the water tap before putting
the washing machine into operation, check
whether the connection is free of leaks.
40