Add Washing Detergent/Care Agent
Refer to the information on washing deter-
3
gents and care agents, see section "Wash-
ing Detergents and Care Agents".
1. Open the washing detergent drawer: grip inside
the flap on the drawer at the bottom (1) and pull
out the drawer as far as it will go (2).
2. Fill with washing detergent/care agent.
Compartment
–
treatment
Compartment for main washing
–
powder
(If you use water softener and need the right
compartment for the pre-wash/soaking agent,
add the water softener to the main washing
detergent in the left compartment.)
Compartment for liquid care agent
–
(Conditioner, finisher, starch)
Attention! Fill the compartment up to the MAX
mark. If necessary, dilute viscous agent up to
the MAX mark, and dissolve powder starch.
Note: It is normal for a small amount of water
to be left in the compartment for liquid condi-
tioner; this will not affect the wash results.
Compartment for pre-wash agent/
–
soaking agent
Only for additonal programs PRE WASH (Vor-
wäsche, Prélavage) and SOAKING (Ein-
weichen, Trempage)
or for water softener
3. Push the drawer fully in.
If using Liquid Detergent/Tabs:
3
Add liquid detergent/tabs in the amount rec-
ommended by the washing detergent indus-
try. Follow the instructions on the detergent
package.
for
in-wash
stain
Main Washing
Powder
Liquid Care Agent
In-wash Stain Treatment
Pre-Wash Agent/
Soaking Agent
or Water Softener
17