Start The Washing Program, Set The Final Spin Speed Or Select Rinse Hold; During The Washing Program; End Of Wash Cycle/Removing The Washing - Electrolux LAVAMAT 50600 Operating Instructions Manual

Start the washing program, set the final spin speed or
select RINSE HOLD
0 Check the water tap is opened.
0 To start the washing machine, pull out the program selector.
The indicator ON light is illuminated, washing program starts
automatically after six seconds.
0 Reduce the spin speed for the final spin or select
RINSE HOLD if required:
– Press the button final spin speed or
– press the RINSE HOLD button.
If RINSE HOLD is selected, the washing is not rinsed in
the last rinsing water, it will not be spun.

During the washing program

you can at any time
– alter the setting of the final spin speed,
– select RINSE HOLD,
– alter the temperature setting;
– press the EASY-CARES button
Other settings cannot be altered.
To interrupt the washing program prematurely:
0 Push in program selector.
0 Rotate the program selector clockwise to PUMP OUT.
0 Pull out program selector.

End of wash cycle/removing the washing

The washing program normally ends with the final spin.
After PRE WASH/SOAKING:
• PRE WASH
After PRE WASH, the main wash cycle must be set as desired, the
3
program does not continue automatically.
0 Set the main wash cycle desired.
All manuals and user guides at all-guides.com
Run wash cycle
21