Installation Instructions - Electrolux EB L4X User Manual

Installation Instructions

Installing the oven
Installation into flammable material must
1
comply with NIN 2005, Chapter 4.2.2 of
the VKF (Association of Cantonal Fire In-
surers) fire protection guidelines and
regulations.
1. Pull the appliance drawer out as far as it
will go, take hold of it and remove it.
2. Slide the oven flush into the space.
Make sure the cable is free when you
slide the appliance in.
3. Secure the oven on both sides with at
least 2 screws (detail A).
Electrical connection/power supply
The oven must be connected to the electric-
ity supply by a qualified electrician or a com-
petent person.
Use a H05VV-F type power cable or higher.
The appliance must be installed with a sock-
et supply line, otherwise the fixed home elec-
trical system must include an isolating device
with at least a 3mm-contact separation to
enable a simultaneous and all-pole cut off
from the mains, according to NIN 2000.
For connecting to appliance directly to the
mains, use a minimum cable length of
120cm.
1. Opening the terminal box (detail D)
2. Open the catch on the cord grip (detail
E).
3. See the connection diagram for the ter-
minal connection.
4. Secure the cord grip by pressing firmly
on the catch (detail F).
5. Closing the terminal box.
6. Fix the connection cable into the holes
provided to prevent it rubbing against
the drawer (detail G).
In case of repair the appliance must
1
be switched off from the mains.
electrolux 29