Keypad Controls And Indicators - Gemini GEM-P800 Using Manual

Keypad Controls and Indicators

 
Fire Alarm Light will flash and the Keypad
sounder will beep when system is in a Fire Alarm
Condition (See Silencing a fire Alarm, Page 8)

Trouble Light will light and the Keypad
sounder will pulse to indicate that a system trou-
ble is present. (See System troubles, Page 12)
Status Light will light when all zones are secure
and system is ready to be Armed.
Armed Light will light when system is Armed, 
and will flash when system is in Alarm
Press followed by the corresponding

Function number to enable special functions and
options. (See Special Functions, Page 11)
To Bypass a zone, press

number to be bypassed, and then Arm system.
Press to reset Fire Zone, clear miss-
entered codes, reset Alarm Memory, etc.
4
Oi219c
page 4
Zone Lights (1 through 8) will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
G E M I N I
 
 

 
    
Numerical
and the zone
Keys 1-9, 0.
Used to en-
ter User
Codes, Zone
numbers,
etc.
AC Light will light to indicate
that AC Power is present.
 
1 2 3 4 5 6 7 8

 
Emergency Keys Press simultaneously
 
to signal an emergency condition.
 
Press + for Fire Emergency,
+ for Auxiliary Emergency or
+ for Police Emergency.
(Programmable)

Press
to bypass all
interior pro-
tective de-

vices such
as motion
sensors, etc.
Press
after entering
User Code
when Arming

or Disarming
System.
Press
to remove
entry delay
from the Exit/
Entry door.
Tuesday, September 16, 1997 08:24