Check STOP switch
is in the position I.
Control fuel level
min. 25% tank capacity.
Check air filter is clean.
Remove spark plug,
dry it, clean it and adjust it,
and replace it, if necessary.
Control and adjust
the carburetor screws if necessary.
Change fuel filter.
Contact your dealer.
Carefully follow the chain
assembly instructions.
Check chain is sharp.
Otherwise, contact your dealer.
Engine still gives trouble: contact your dealer.
Fault finding table
Engine will not start
Engine runs badly
•
•
•
•
The chainsaw runs
but does not cut well
•
•
•
•
•
•
Engine runs badly or
looses power when cutting
•
•
ENGLISH - 7
Need help?
Do you have a question about the MAC 538E and is the answer not in the manual?
Questions and answers