Bluetooth At Glance - AT&T EP5632 User Manual

Bluetooth
NOTE: Before using
your Bluetooth device(s)
with the telephone base,
make sure that your
Bluetooth device(s) are not
connected to any other
device(s).
Connect to Device
Unable to connect.
Enable Auto Connect
Function?
YES
Bluetooth system
busy
NOTE: The screen will
display Bluetooth system
busy under the following
two circumstances, see page
96 for more details.
1. You are trying to use
the CELLULAR line while
the telephone base is
communicating with another
bluetooth device.
2. When the CELLULAR line
on one of the handsets or
telephone base is in use,
and another handset or
telephone base is trying
to make a call on the
CELLULAR line.

Bluetooth at Glance

The telephone base allows you to pair up to eight
Bluetooth devices. You can have a maximum of two
paired devices connected at anytime (two cellular
phones, or one cellular phone and one headset), but
only one cellular phone or headset can be on a call
at a time.
Once you have paired a device with the telephone
base, the pairing information will be stored on the
Paired Devices list (page 25). To use a paired device,
it must be connected and on the Active Devices list
(page 27).
When a device on the Active Devices list
becomes disconnected, the Auto Connect
function on the telephone base will automatically
search for and re-connect to that device. If the
telephone base is unable to connect to the
NO
device, the Connect to Device screen will appear
on the display. Pressing the YES softkey allows
the Auto Connect function to continue searching
for the device. Pressing the NO softkey ends the
search, and the device will remain disconnected.
To learn more about managing your Bluetooth
device(s), see the Managing your Devices section
(page 25). To help you setup your Bluetooth
device(s), please follow the instructions in each
section and refer to the Troubleshooting section
for help (page 94).
IMPORTANT INFORMATION
• Once you pair a device with the telephone base,
you do not have to repeat the pairing procedure
again unless you delete the device from the
Paired Devices list (page 25).
• Press CANCEL on the telephone base at anytime
to return to a previous menu.
• When adding, removing, or replacing a Bluetooth
device on the Active Devices list, all connected
devices will temporarily disconnect until the
action is complete. It may take up to two minutes
to reconnect.
21
, but