AT&T EP5632 User Manual page 32

Bluetooth
Active Devices
X 1 My Headset
John's Cell
P2
DISCONN INFO OPTIONS
Device Options
Replace Device
Remove Device
SELECT
Replace with:
John's Headset
Mary's Cell
SELECT
Active Devices
X 1 My Headset
Mary's Cell
P2
INFO
DISCONN OPTIONS
Active Devices
X 1 My Headset
John's Cell
P2
DISCONN INFO OPTIONS
Device Options
Replace Device
Remove Device
SELECT
Replace an active device
Replacing a Bluetooth device on the Active
Devices list will replace an active device with a
device from the Paired Devices list.
To replace an active device:
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN NavKeys to highlight
Bluetooth, then press the SELECT softkey to
enter the Bluetooth menu.
3. Press the DOWN NavKey to highlight Active
Devices, then press the SELECT softkey. The
screen will then display the active devices.
4. Press the UP and DOWN NavKeys to select
the device to replace, then press the OPTIONS
softkey.
5. Press the SELECT softkey to replace a device.
The selected device will now be disconnected.
INFO
6. Press the UP and DOWN NavKeys to select
a device, then press the SELECT softkey. The
selected device will then replace the previous
device on the Active Devices list.
Remove an active device
Removing an active device will only remove it
from the Active Devices list.
To remove an active device:
1. Follow steps 1 through 4 in the above section.
2. Press the DOWN NavKey to highlight Remove
Device.
3. Press the SELECT softkey to remove the device
from the Active Devices list.
• If you have other paired devices, you will
be prompted to select an already paired
device.
• If you do not have other paired devices,
see pages 23 and 24 to add new devices.
28