Related Manuals for AT&T E1128B
Summary of Contents for AT&T E1128B
- Page 1 Quick Start Guide 2.4 GHz Cordless Telephone/Answering System E2728B/E1128B with Caller ID & Call Waiting...
- Page 2 Installation and setup After battery installation, place the cordless handset in the base or charger and allow to charge for at least 16 hours before use. You can keep the battery charged by return- ing the cordless handset to the base or charger after each use. When the battery is fully depleted, a recharge takes about 16 hours.
- Page 3 Quick reference guide Cordless Handset PHONE/FLASH Press to make or answer a call. During a call, press to receive an incoming call if Call Waiting is activated. While in menus, press to scoll down. When phone is not in use, press to display call log entries.
-
Page 4: Telephone Base
Quick start guide Telephone Base CHARGE/IN USE Flashes when one of the cordless handsets is in use. On steady when the cordless handset is properly positioned to charge in the base. Flashes during an incoming call’s ringing. Answering System Controls ANSWER ON/OFF...Press to turn answering system on or off. - Page 5 Choose a locaton for your telephone Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a fl at surface or mounted on a standard wall plate.
- Page 6 Copyright © 2006 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 3 AT&T 05/06. 96-006096-030-000.
Need help?
Do you have a question about the E1128B and is the answer not in the manual?
Questions and answers