Answer On/Off - AT&T EP5632 User Manual

System setup
Main Menu
Directory
Call Log
Answering System
SELECT
Answering System

Answer On/Off

Announcement
Record Memo
SELECT
Answer On/Off
P On
Off
SET
Answer On/Off
By default, the answering system is on. When the
answering system is off, ANS. OFF appears on the
telephone base display. This means that incoming
calls will not be answered by the answering
system. However when the answering system is
off, you can still play recorded messages (page
88) or record a memo (page 91).
To turn the answering system on or off: o turn the answering system on or off:
1. Press the MENU softkey on the telephone base
to enter the main menu.
2. Press the UP and DOWN NavKeys to highlight
Answering System, then press the SELECT
softkey.
3 Press the SELECT softkey to select Answer
On/Off.
4. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey to save
your selection.
NOTE: When the answering system is off, the
answering system will answer an incoming call after 10
rings and then prompt the user to enter the remote access
code (page 92). If no correct remote access code is
entered, the call will be ended automatically.
50