Table of Contents
Advertisement
DMX Channel Assignments and Values
7-CH
Channel
3-CH
Channel
5. T
ECHNICAL
Product
Maintenance
Page 16 of 18
Function
1
Red
2
Green
3
Blue
Color Macros
4
(overrides CH. 1-3)
Speed
(when CH.6 is 032~223)
5
Strobe
6
Mode
7
Dimmer
Function
1
Red
2
Green
3
Blue
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
•
Unplug the product from power.
•
Wait until the product is cold.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
•
Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
•
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•
Softly drag any dirt or grime to the outside edge of the glass/transparent surface.
•
Gently polish the glass/transparent surfaces until they are free of haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.
Value
Setting
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 015 No function
016 255 Color Macros
000 255 0~100%
000 015 No function
016 255 Slow to fast
000 031 RGB Mode
032 063 Pulse effect 0~100%
064 095 Pulse effect 100%~0
096 127 Pulse effect 100%~0~100%
128 159 Auto fade transition
160 191 Auto snap transition (3 colors)
192 223 Auto snap transition (7 colors)
224 255 Sound-Active mode
000 255 0~100%
Value
Setting
000 255 0~100%
000 255 0~100%
000 255 0~100%
SlimPAR™ Tri IRC series User Manual (Rev. 5)
Advertisement
Table of Contents
