DMX Personality
and Starting
Address
DMX Channel Assignments and Values
Channel Function
12CH
SlimPAR Pro H USB User Manual Rev. 2
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product's channels.
The SlimPAR PRO H USB uses up to 12 DMX channels in a 12CH DMX mode, which
defines the highest configurable address to 501.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 6-CH, 7-CH, or 12CH shows on the display.
Press <ENTER> and d 1–512 will show on the display.
2.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Dimmer
1
Red
2
Green
3
Blue
4
Amber
5
White
6
UV
7
Strobe
8
Color Macros
9
(Overrides Ch. 2–7)
Mode
10
Speed
(when CH10 is 032–223)
11
Sound Sensitivity
(when CH10 is 224–255)
Dimmer Speed
12
Value
Percent/Setting
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 015 No function
016 255 Strobe, slow to fast
000 015 No function
016 255 Color macros
000 031 No function
032 063 Pulse effect 0–100%
064 095 Pulse effect 100%–0
096 127 Pulse effect 100%–0–100%
128 159 Auto fade transition
160 191 Auto snap transition (6 colors)
192 223 Auto snap transition (32 colors)
224 249 Sound-active mode (6 colors)
250 255 Sound-active mode (32 colors)
000 255 Slow to fast
000 010 Off
011 255 Control the sound sensitivity level
000 051 Default dimmer speed set from menu
052 101 Dimmer speed mode off
102 152 Dimmer speed mode 1 (fast speed)
153 203 Dimmer speed mode 2 (medium speed)
204 255 Dimmer speed mode 3 (slow speed)
CH2~7 must be
active
Page 11 of 19