Table of Contents
Advertisement
DMX Personality
and Starting
Address
DMX Channel Assignments and Values
Channel Function
5-CH
Channel Function
1-CH
Page 12 of 19
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The COREpar UV USB uses up to 5 DMX channels in a 5-CH DMX mode, which defines
the highest configurable address to 508.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 1-CH or 5-CH shows on the display.
2.
Press <ENTER> and d 1–512 will show on the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
UV
1
Strobe
(when CH3 is 000–031)
Speed
2
(when CH3 is 032–223)
Sound Sensitivity
(when CH3 is 224–255)
Programs
3
Dimmer
4
5
Dimmer Speed
1
UV
Value
Percent/Setting
000 ó 255 0–100%
000 ó 015 No function
016 ó 255 Slow to fast
000 ó 255 Slow to fast
000 ó 010 Off
011 ó 255 Control the sound sensitivity level
000 ó 031 No function
032 ó 095 Pulse effect 0–100%
096 ó 159 Pulse effect 100%–0
160 ó 223 Pulse effect 100%–0–100%
224 ó 240 Sound triggering mode 1
241 ó 255 Sound triggering mode 2
000 ó 255 0–100%
000 ó 051 Default dimmer speed set from menu
052 ó 101 Dimmer speed mode OFF
102 ó 152 Dimmer speed mode 1 (fast speed)
153 ó 203 Dimmer speed mode 2 (medium speed)
204 ó 255 Dimmer speed mode 3 (slow speed)
Value
Percent/Setting
000 ó 255
0–100%
COREpar UV USB User Manual Rev. 1
Advertisement
Table of Contents
