Mounting; Orientation; Rigging - Chauvet Circus 2.0 IRC User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Circus™ 2.0 IRC User Manual (Rev. 1)
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Circus™ 2.0 IRC may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Clamp
Technical Specifications).
Mounting Bracket
Safety Cable
Mounting Bracket
Adjustment Knob (2x)
Page 9 of 17