Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet Circus 2.0 IRC User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Configuration
(DMX)

Starting Address

Page 10 of 17
To access the control panel functions, use the four buttons located underneath the
display.
Button
Selects an operation mode or to backs out of the current menu
<MENU>
option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENT> Activates a menu option or a selected value
Mode Programming Steps Description
DMX Address 4-CH
Standalone Sound
Sound/Speed S--
Standalone
Auto-Configure
Infrared (IRC Mode) SEr
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Circus™ 2.0 IRC uses up to 4 DMX channels in its 4-channel DMX mode, which
defines the highest configurable address to 509.
If unfamiliar with DMX or DIP switches, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4-CH shows on the display.
2. Press <ENT>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENT>.
Function
d 1–d512 Selects the DMX starting address
SNd Sound-Active standalone mode
Sound sensitivity in Sound-Active mode
S 1–S100
Speed in automatic programs
AUTO Standalone automatic programs
oN
Turns infrared for remote control on or off
oFF
Circus™ 2.0 IRC User Manual (Rev. 1)