Table of Contents
Advertisement
7. CLOCK FUNCTIONS
Symbol
Setting the clock functions
1.
Go to Functions menu and set a
heating function and a temperature.
2.
Go to Timers menu and set the clock
function.
3.
Touch
time. Touch OK to confirm.
When the clock function ends, an
acoustic signal sounds. The appliance
deactivates. The colours on display
change and the clock function symbol
flashes.
4.
Touch a sensor field to stop the sig-
nals.
When you use the Food Probe,
the functions Duration and End
Time do not operate.
You can set the Reminder func-
tion when the appliance is on or
off. To set the Reminder function
when the appliance is off, touch
time. Touch OK to confirm.
The Reminder function stays on
also when you deactivate the ap-
pliance.
7.1 Set+Go
Set the heating function and the tempera-
ture. In the Timers menu set the Set+Go
function and touch OK. The appliance is
in the standby mode. Touch any sensor
field to start the set heating function.
Function
Set duration
Set start time
Set end time
Set+Go
Count up timer
Set reminder
or
to set the necessary
or
to set the necessary
To set a count down.
To set when the appliance activates.
To set when the appliance deactivates.
To set the settings for the heating function and acti-
vate it later.
To set a count up. It shows how long the appliance
operates. This function has no effect on the opera-
tion of the appliance.
To set a countdown. This function has no effect on
the operation of the appliance.
7.2 Heat and Hold
The Heat and Hold function keeps pre-
pared food warm at 80° for 30 minutes. It
activates after the baking or roasting pro-
cedure ends.
When the function ends, an acoustic sig-
nal sounds.
The Heat and Hold function operates for
30 minutes and stays on if you change
the heating functions.
7.3 Time Extension
The Time Extension function makes the
heating function continue after the set
time ends.
• Applicable for all heating functions with
Duration or Weight automatic functions.
• Not applicable for heating functions
with Food Probe.
Description
You can activate or deactivate the
function in the Settings menu.
Conditions for the function:
• The set temperature is higher
than 80°C.
• The Duration function is set.
You can activate or deactivate the
function in the Settings menu.
ENGLISH
15
Advertisement
Table of Contents
