Using The Macro Keys - Radio Shack 7-in-One Home Theater Owner's Manual

15-1935.fm Page 41 Thursday, December 31, 1998 11:37 AM
Note: You might need to use the
control volume, depending on which device you select-
ed during these steps.
Resetting Volume Lock
To restore volume control to each individual device:
1. Hold down
SETUP
2. Press twice. CONFIGURE appears.
MENU
3. Press . THEATR SEL appears.
SELECT
4. Press twice. VOL LOCK appears.
MENU
5. Press . LOCK appears.
SELECT
6. Press . UNLOCK appears.
MENU
7. Press . Each device now controls its own
SELECT
volume when you use the volume keys on your 7-
in-One.

USING THE MACRO KEYS

The 7-in-One has two macro keys,
key lets you play back a series of up to 15 keystrokes at
any time with the press of a single key, in any mode.
You can set up a maximum of 36 macros, 15 timed se-
quences (see "Setting Up Timed Sequences" on
Page 42), or a combination of both.
For example, follow these steps to set up a macro on
that turns on your TV, VCR, and satellite system so
VID
you can record a program.
Note: If you make a mistake, press
at Step 1.
1. Hold down
SETUP
Need help? Call 1-800-763-9232
or
MENU VOL
until TIMED SEQ appears.
and
AUD
and start over
ESC
. TIMED SEQ appears.
keys to
. Each
VID
41