Cooking Zone Selection; Heat Setting Selection + And; Switching The Triple Ring Cooking Zone On And Off - Electrolux EHS 6650 P Installation And Operating Instructions Manual

Cooking Zone Selection

To select the required cooking zone touch the corre-
sponding sensor field for approx. one second.
A zero with a decimal point will light up in the appro-
priate cooking zone display window 0.
3
The decimal point indicates that settings may
only be made for this cooking zone.

Heat Setting Selection + and -

For setting and adjusting the heat setting (1 to 9)
for the selected cooking zone.
Use sensor field + to increase the heat setting.
Lower the heat setting with sensor field -.
3
If several cooking zones are being used simul-
taneously, the required cooking zone must be
selected by touching the appropriate sensor
field before adjusting the heat setting. The
decimal point in the display shows which
cooking zone has been selected.
Switching the Triple Ring Cooking
Zone On and Off
Depending on the size of the pot or pan, when using
the triple ring cooking zone each of the larger cook-
ing rings can be switched on in turn, in addition to
the smallest cooking zone, using the "booster" sen-
sor field on the control panel.
3
These can only be activiated if the smaller ring
is already switched on.
1. Select the appropriate cooking zone.
2. Set the required heat setting.
10