Cooking Zone Selection; Heat Setting Selection; Activating The Power Function - Electrolux EHD 6675 U Installation And Operating Instructions Manual

Cooking Zone Selection

To select the required cooking zone touch the corre-
sponding sensor field for approx. one second.
A zero with a decimal point will light up in the appro-
priate cooking zone display window 0.
3
The decimal point indicates that settings may
only be made for this cooking zone.

Heat Setting Selection

For setting and adjusting the heat setting (1 to 9)
for the selected cooking zone.
Use sensor field + to increase the heat setting.
Lower the heat setting with sensor field -.
3
If several cooking zones are being used simul-
taneously, the required cooking zone must be
selected by touching the appropriate sensor
field before adjusting the heat setting. The
decimal point in the display shows which
cooking zone has been selected.

Activating the power function

In order to switch on the power function (front left
cooking zone only), the cooking zone must be se-
lected (decimal point in the display). Touch the
"Power function" sensor field . p appears in the
display and the power function has now been acti-
vated.
3
The power function will be activated for a
maximum of 10 minutes. Following this the
cooking zone will automatically switch to heat
level 9.
The power function can be switched off in the follow-
ing way:
• Touching the "Power function" sensor field .
• Touching the sensor field -.
1
While the power function of the front left cook-
ing zone is active, the front right induction
cooking zone can be operated at a maximum
heat setting of 7.
If a higher setting than 7 (e.g., 8, 9 or A) is set for the
front right cooking zone, the heat setting display will
alternately show the heat setting selected and 7. As
soon as the power function has ended (max. 10 min-
utes), the front right cooking zone will change auto-
matically to the previously set heat setting.
13