Abit BM6 User Manual page 67

BIOS Flashing User Instructions
The BIOS file name in the figure shown to you is only an example, you should check
which .bin file is to be used with your motherboard, don't flash with the wrong .bin file.
Otherwise, you may cause system malfunctions. Even the same models BIOS,
according its release date and according to which problems are fixed, also have
different .bin names. Please read the BIOS file description before you download it.
Example 1: To update the BIOS and create a backup of the current system BIOS execute
this command:
AWDFLASH NEWBIOS /PY SAVEBIOS /SY
Example 2: To update the BIOS, create a backup of current system BIOS, and clear the
CMOS, execute this command:
AWDFLASH NEWBIOS SAVEBIOS /CC
Example 3: To update the BIOS and clear PnP settings execute this command:
AWDFLASH NEWBIOS /SN /CP
Example 4: To make a backup of the current system BIOS execute the following command:
AWDFLASH NEWBIOS /PN SAVEBIOS
"NEWBIOS" indicates the file name for the new BIOS which can be downloaded from
our web site at http://www.abit.com.tw
place of NEWBIOS). "SAVEBIOS" indicates the filename of the old system BIOS (the
user can choose a different file name in place of SAVEBIOS).
Explanation of parameter names:
/CC: Clears CMOS data
/CP: Clears PnP data
/CD: Clears DMI data
Remarks:
1. When executing AWDFLASH.EXE, do not run HIMEM.SYS and EMM386.EXE in the
CONFIG.SYS.
User's Manual
Note A-1
Notes A-2
(the user can choose a different file name in
A-3