Abit BM6 User Manual page 40

3-14
Security Option:
This option can be set to System or to Setup.
After you have created a password through PASSWORD SETTING, this option will deny
access to your system (System) or modification of computer setup (BIOS Setup) by
unauthorized users.
äSYSTEM: When you choose System, a password is required each time the computer
boots up. If the correct password is not given, the system will not start.
äSETUP:
When you choose Setup, a password is required only when accessing the
BIOS Setup. If you have not set a password in the PASSWORD SETTING
option, this option is not available.
Don't forget your password. If you forget the password, you will have to open the
computer case and clear all information in the CMOS before you can start up the
system. But by doing this, you will have to reset all the options you had set up before.
PCI /VGA Palette Snoop:
This option allows the BIOS to preview VGA Status, and to modify the information
delivered from the Feature Connector of the VGA card to the MPEG Card. This option can
solve the display inversion to black after you have used the MPEG card.
OS Select For DRAM > 64MB:
When the system memory is bigger than 64MB, the communication method between the
BIOS and the operating system will differ from one operating system to another. If you use
OS/2, select OS2; if you choose another operating system, select Non-OS2.
Report No FDD For WIN 95:
When using Windows 95 without floppy drive, please set this item to Yes.
Notice
Chapter3
BM6