Abit BM6 User Manual page 52

3-26
ä IRQ [3-7, 9-15], NMI:
If any IRQ or NMI (Non-Mask Interrupt) activities occur, this will cause the computer to
re-count the time elapsed.
ä VGA Active Monitor:
If there is any VGA data transfer or any I/O activities, this will cause the computer to
re-count the time elapsed.
ä IRQ8 Break Suspend:
Supports the RTC alarm wake up from suspend function (via IRQ8).
ä IDE Primary Master:
If any IDE primary master I/O activity occurs, it will cause the computer to re-count the
time elapsed.
ä IDE Primary Slave:
If any IDE primary slave I/O activity occurs, it will cause the computer to re-count the
time elapsed.
ä IDE Secondary Master:
If any IDE secondary master I/O activity occurs, it will cause the computer to re-count
the time elapsed.
ä IDE Secondary Slave:
If any IDE secondary slave I/O activity occurs, it will cause the computer to re-count the
time elapsed.
ä Floppy Disk:
If any floppy disk I/O activity occurs, it will cause the computer to re-count the time
elapsed.
ä Serial Port:
If any serial port I/O activity occurs, it will cause the computer to re-count the time
elapsed.
ä Parallel Port:
If any Parallel port I/O activity occurs, it will cause the computer to re-count the time
elapsed.
ä Mouse Break Suspend:
Four options are available: YesèNo (COM1) èNo (COM2) èNo (PS/2) èBack to
Yes.
Chapter3
BM6