Abit BM6 User Manual page 59

BIOS Setup
The mouse wake up function can only be used with the PS/2 mouse, not with a mouse
that uses the COM port and USB connection. Mouse Left (Mouse Right) means, you
need to double click the mouse left (right) button, for the computer to power on. You
also need to note the compatibility issue with your PS/2 mouse, some PS/2 mice cannot
wake up the system, because of compatibility problems. If the spec. of your keyboard is
too old, you may fail to power on.
/ Keyboard 98:
If you are using Windows
®
Windows 98 operating system. You can enable this item, and use your keyboard wake
up key to wake up your computer.
/ Hot Key Power On:
There are twelve options are available, Ctrl-F1 to Ctrl-F12. You can select this item and
using the Ctrl plus the one of each function key (F1 to F12) to power on the computer.
Onboard FDD Controller:
This is to Enable or Disable the Onboard FDD Controller.
Onboard Serial Port 1:
This is used to specify the I/O address and IRQ of Serial Port 1. Ten options are available:
Disable, 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4 or 2E8h/IRQ3, 3F8h/IRQ10, 2F8h/IRQ11,
3E8h/IRQ10, 2E8h/IRQ11, and AUTO.
Onboard Serial Port 2:
This is used to specify the I/O address and IRQ of Serial Port 1. Ten options are available:
Disable, 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4 or 2E8h/IRQ3, 3F8h/IRQ10, 2F8h/IRQ11,
3E8h/IRQ10, 2E8h/IRQ11, and AUTO.
/ Onboard IR Function:
Three options are available:
User's Manual
Note
®
98 and you have a keyboard that is designed for the
3-33