Abit BM6 User Manual page 60

3-34
ä IrDA (HPSIR) mode.
ä ASK IR (Amplitude Shift Keyed IR) mode.
ä Disabled.
/ RxD , TxD Active:
Set IR transmission/reception polarity as High or Low.
/ IR Transmission Delay:
Set IR transmission delays 4 character-time(40 bit-time) when SIR is changed from RX
mode to TX mode.
Onboard Parallel Port:
Sets the I/O address and IRQ of the onboard parallel port. Four options are available:
Disable, 3BCh/IRQ7, 278h/IRQ5 and 378h/IRQ7. Default is 378h/IRQ7.
/ Parallel Port Mode:
Can be set as ECP, EPP, ECP+EPP, or Normal (SPP) mode. Default is Normal (SPP)
mode.
/ ECP Mode Use DMA:
When the mode selected for the onboard parallel port is ECP, the DMA channel selected
can be Channel 1 or Channel 3.
/ EPP Mode Select:
When the mode selected for the onboard parallel port is EPP, two EPP version options
are available: EPP1.7 and EPP1.9.
Chapter3
BM6