Raid Config - Abit KN8 ULTRA User Manual

RAID Config:

Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
RAID Enable
X - IDE 1 Master RAID
X - IDE 1 Slave RAID
X - IDE 2 Master RAID
X - IDE 2 Slave RAID
X - Serial-ATA 1 RAID
X - Serial-ATA 2 RAID
X - Serial-ATA 3 RAID
X - Serial-ATA 4 RAID
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
RAID Enable:
This item allows you to enable or disable the IDE RAID function.
- IDE 1/2 Master/Slave RAID, Serial ATA 1/2/3/4 RAID:
Select the disks that you want to use as RAID disks.
Back to Integrated Peripherals Setup Menu:
Init Display First:
This item selects which display slot to be initialized first when the system boots.
[PCI Slot]: When the system boots, it will first initialize PCI.
[PCIEx]: When the system boots, it will first initialize PCIE.
OnChip USB:
Three options are available: Disabled
If you choose to disable this item, the "USB Keyboard Support" and "USB Mouse Support"
items will not be able to select in Integrated Peripherals menu.
- USB Keyboard Support:
This item allows you to select [Enabled] for using USB keyboard in DOS environment, or
[Disabled] in OS environment.
3-16
RAID Config
Diaabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
F6: Fail-Safe Defaults
V1.1+V2.0
F7: Optimized Defaults
V1.1. The default setting is V1.1+V2.0.
KN8 Ultra-SOTES, KN8 Ultra, KN8
Item Help