Raid Config - Abit AN8 SLI User Manual

BIOS Setup
$

RAID Config:

Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
- RAID Enable
X - IDE Primary Master RAID
X - IDE Primary Slave RAID
X - IDE Secondary Master RAID
X - IDE Secondary Slave RAID
X - SATA 1 Primary Master RAID
X - SATA 1 Secondary Master RAID
X - SATA 2 Primary Master RAID
X - SATA 2 Secondary Master RAID
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
RAID Enable:
This item allows you to enable or disable the IDE RAID function.
! IDE Primary/Secondary Master/Slave RAID, SATA 1/2 Primary/Secondary Master RAID:
Select the disks that you want to use as RAID disks.
$ Back to Integrated Peripherals Setup Menu:
USB Park Mode:
This item enables or disables the USB Park Mode. Leave this item to its default setting.
USB TD Reads:
This item selects the mode for the USB TD Reads. Leave this item to its default setting.
USB Periodic Data Reads:
This item selects the mode for the USB Periodic Data Reads. Leave this item to its default setting.
USB Asyn Data Reads:
This item selects the mode for the USB Asyn Data Reads. Leave this item to its default setting.
Onboard FDC Controller:
Two options are available: Enabled and Disabled. The default setting is Enabled. You can enable or
disable the onboard FDC controller.
RAID Config
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
User's Manual
3-21