Using The Alarm; Alarm Time Setting; Alarm Alert Setting; Alarm Mode Setting - Geemarc TravelClock Product Manual

USING THE ALARM

Alarm Time Setting

Slide the settings switch to the Alarm Set
'ALARM' and the alarm HOUR digits will start to flash. Use
"
to select the required alarm hour
Press Mode button
The alarm MINUTE digits will flash. Use
required alarm minutes
Press Mode button
The SNOOZE digits will flash. Use
snooze time. The range of snooze time is between 1 – 60 minutes
When satisfied with the alarm setting, slide the setting switch back to
the Lock position. This protects the set alarm time against accidental
changes caused by touching buttons
position
!
and
! "
and to select the
! "
and to select the required
5 9 9
USING THE ALARM

Alarm Alert Setting

Select the alarm alert you wish to use by sliding the alarm alert switch to
one of the following selections:
VIB = Shaker alarm
VIB+AL = Shaker and sound and strobe alarm
AL = Sound and strobe alarm

Alarm Mode Setting

Select the alarm mode you wish to hear by sliding the alarm mode switch
to one of the following selections:
Alarm On = Alarm on, snooze off. The alarm icon will be displayed
in the top left corner of the screen
The alarm will ring once for 1 minute. Press the Snooze/Light button to
stop the ringing. The alarm will not ring again.
Snooze On = Alarm on, snooze on. The alarm and the snooze (Zz)
icons will be displayed in the top left corner of the screen
Press the Snooze/Light button to stop the ringing. The alarm will ring
three times for 1 minute whilst in snooze mode . The snooze interval
between the three rings can be set when setting the alarm time.
Alarm Off = Alarm off, snooze off. The alarm will not ring

Alarm Volume Setting

The alarm volume can be altered using the alarm volume setting key.
Decrease volume
The alarm volume can be altered while the alarm is ringing or simply in
standby mode.
Increase volume
10