Setting The Alarm Time; Setting The Time - Geemarc Large Display Alarm Clock User Manual

unplug the AC adaptor. When installing the apparatus, ensure that the mains
power socket is readily accessible.
Telephone connection : Voltages present on the telecommunication network are
classified TNV-3 (Telecommunication Network Voltage) according to the
EN60950 standard.

2 - SETTING THE TIME (

)
- Press and hold (set clock) button.
- Press H (hour) and M (minute) until correct
hour and minutes appear on the display.
- Release (set clock) button.
- For p.m. hours, the p.m. indicator will appear
on the display near the inscription PM.

3 - SETTING THE ALARM TIME (

)
- Press and hold (set alarm) button.
- Press H (hour) or M (minute) until correct hour
and minutes appear on the display.
- Release (set alarm) button.
- Press , H and M to reset the alarm clock to
12.
5