User Manual
VISO10 – MSF
(United Kingdom)
Please refer to our website: www.geemarc.com
for an up-to-date user guide - there may be
important updates and changes you need to be
aware of.
For best use of the Viso10 – please read all
sections of this user guide. Keep the user guide
in a safe place for future reference.
1. Features
- Easy to read and understand time display
- Calendar up to year 2099
- Day of the week & month in 8 languages
(user selectable)
1
2. Unit Appearance
Display (LCD)
Push-Button Controls
A1: Day of the Week
B1:"MODE/
B2: "▼" Button
A2: Radio Control Icon
B3: "▲" Button
A3: Time
A4: Month
B4: "WAVE/
A5: Date
(Restart the signal
A6: Year
search)
A7: Locked keys
A8: AM / PM
A9: Season indicator
Winter / Summer
Structure
C1: Hanging Keyhole
C2: Battery Compartment Cover
C3: Stand
2
3. Getting started:
Open the battery compartment cover (C2).
Insert 3 x AA alkaline batteries. Observe the
correct polarity "+" and "–". A "click" is
heard when the batteries are inserted
correctly.
Replace the battery compartment cover.
4. Time Setting
4.1 Manual Time Setting:
In time display, press and hold "MODE/
button(B1)
for
Clock/Calendar setting Mode.
Press "▼" (B2) or "▲" (B3) button to adjust
the setting then press "MODE" button (B1) to
confirm each setting.
(Press and hold the "▼" (B2) or "▲" (B3)
buttons to reach the desired value faster)
The setting sequence is shown as follows:
Weekday & Month Language, 12/24 Hr, RCC
"Button
(Radio Clock) ON/OFF, Time Zone, Hour, Minute,
Year, Month, Day, DST.
There are 8 languages for day of the week and
" Button
month: English, German, French, Spanish,
Italian, Dutch, Polish and Swedish.
4.2 Radio Controlled Time:
When Viso10 is switched on, it will
automatically scan the MSF time signal.
The Radio Control Icon "
the (LCD) display – as indicated below.
(A2) flashes
(A2) ON
(A2)disappears
To maintain accurate time, the clock will
"
3
seconds
to
enter
" (A2) flashes on
Receiving MSF signal
MSF signal received
successfully
MSF signal reception
failed
3
Need help?
Do you have a question about the VISO10-MSF and is the answer not in the manual?
Questions and answers