Setting The Alarm Mode - Geemarc Wake'n'Shake Instruction Manual

SETTING

4- SETTING THE ALARM MODE

Put the function switch on A+T position.
Choose which alarm mode you wish to be awakened to
by moving the alarm mode switch to one of the following
selections:
V : only shaker activated
V+S : both sound and shaker alarm activated
V+F : both strobe light and shaker alarm activated
V+F+S : strobe light, sound and shaker alarm activated
Note: if user doesn't use the V (shaker function), please
unplug the shaker plug from the clock.
When the alarm is set to one of the alarm modes, the
alarm indicator will appear on the display near the
inscription AL.
The table below shows how the alarm modes indicate
an incoming call from the alarm clock.
4