Rack Side Panels - HP BladeSystem c7000 Maintenance And Service Manual

5. Pull down on the spring-loaded handles on the hinge assembly at the top of the door until the
small pin securing the door to the hinge retracts.
6. Move the top of the door away from the rack until the spring-loaded pin is free of the hinge
assembly.
CAUTION:
Moving the top of the door too much from the rack can bend the pin holding the bottom of
the door.
7. Lift the door over the pin at the bottom of the rack, and remove the door. Verify that the plastic
bushing remains on the pin.
To reinstall the component, reverse the procedure.

Rack side panels

To remove the component:
1. Using a slotted screwdriver, gently unfasten the four quarter-turn fasteners from the side panel.
2. Lift the side panel from the rail on which it is mounted, and remove it from the rack.
Do not move the top of the door farther away from the rack than necessary.
Rack side panels 9