b.
Detach the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided adhesive.)
c.
Remove the wireless antenna.
The wireless antenna are available using spare part number 720532-001.
Reverse this procedure to reassemble and install the display assembly.
Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Solid-state drive (see
b.
Hard drive (see
c.
Base enclosure (see
d.
Display assembly (see
Battery on page
43), and then remove the following components:
Solid-state drive on page
Hard drive on page
47)
Base enclosure on page
Display assembly on page
44)
55)
57)
Component replacement procedures
Spare part number
720235-001
65