HP ENVY 15 Maintenance And Service Manual page 68

7. Remove the display assembly (2) from the computer.
8. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Remove the two screw covers (1) and the four Phillips PM2.5×3.2 broad head screws (2)
that secure the display bezel to the display assembly.
The screw covers are available in the Rubber Kit, spare part number 720559-001.
b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom
edge (3) of the display bezel until the bezel disengages from the display enclosure.
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts