Storage; Power Supply - Fluke 1730/BASIC User Manual

Storage

When not in use, keep the Logger in the protective storage
bag/case. The bag/case has sufficient space for the
Logger and all the accessories.
If the Logger is stored for an extended period of time or is
not in use for a long time, you should charge the battery at
least once every six months.

Power Supply

The Logger includes a removable power supply, see
Figure 3. The power supply is either attached to the
Logger or used externally with a DC power cord. The
configuration with the externally connected power supply is
preferred in locations where the Logger with the power
supply attached is too big to fit in a cabinet between the
door and panel.
When the power supply is connected with the Logger and
connected to line power, it:
converts line power to dc power and is used directly by
the Logger
automatically turns on the Logger and continuously
powers the Logger from the external source (after
initial power on, the power button turns on and turns
off the Logger)
recharges the battery
Shop for Fluke products online at:
The power cord/measurement line cover slides to select
the input source.
To prevent possible electrical shock, fire, or
personal injury, do not use the power supply if
the power cord/measurement line slide-cover
is missing.
MyFlukeStore
www.
 Warning
Figure 3. Power Supply and Battery
1.877.766.5412
.com
Energy Logger
Storage
hcf031.eps
7