Fluke 1730/BASIC User Manual page 54

Energy logger

Hide thumbs Also See for 1730/BASIC:

Technical data manual (6 pages)

Table Of Contents

Table of Contents

1730

Users Manual

Radio Frequency Emissions ................................ IEC CISPR 11: Group 1, Class A.

Electrical Specifications

Power Supply

Voltage Range .................................................... nominal 100 V to 500 V (85 V min to 550 V max) using safety plug input

Mains Power ....................................................... nominal 100 V to 240 V (85 V min to 265 V max) using IEC 60320 C7 input (figure 8 power cord)

Power consumption ............................................ Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)

Standby Power ................................................... <0.3 W only when powered using IEC 60320 input

Efficiency ............................................................ 68.2 % (in accordance with energy efficiency regulations)

Mains Frequency ................................................ 50/60 Hz 15 %

Battery Power ..................................................... Li-ion 3.7 V, 9.25 Wh, customer-replaceable

On-Battery Runtime ............................................ up to 4 hr (up to 5.5 hr in energy saving mode)

Charging Time .................................................... <6 hr

Data Acquisition

Resolution ........................................................... 16-bit synchronous sampling

Sampling Frequency ........................................... 5120 Hz

Input Signal Frequency ....................................... 50/60 Hz (42.5 to 69 Hz)

Wiring Configurations ......................................... 1-Φ, 1-Φ IT, Split phase, 3-Φ wye, 3-Φ wye IT, 3-Φ wye balanced, 3-Φ delta, 3-Φ Aron/Blondel (2-element

Interfaces

USB-A ............................................................. File transfer via USB Flash Drive, Firmware updates, max. supply current: 120 mA

USB-mini ......................................................... Data download device to PC

Extension port ................................................. Accessories

Shop for Fluke products online at:

Group 1 has intentionally generated and/or use conductively coupled radio-frequency energy which is

necessary for the internal functioning of the equipment itself.

Class A equipment is suitable for use in non-domestic locations and/or directly connected to a low-voltage

power supply network.

delta), 3-Φ delta open leg, Currents only (load studies)

MyFlukeStore

www.