Fluke 1730/BASIC User Manual page 39

Phase Color/Phase Labels
The phase colors are configurable to match with the
connector panel decal. Five schemes are available:
A/L1 B/L2
US black red
Canada red black
EU brown black
UK (old) red yellow
China yellow green
To change the phase color/phase labels:
1. Push .
2. Push  (Instrument Settings).
3. Push  to highlight Phases. Push  or touch
Phases target.
4. Select one of the available schemes.
5. Push  to toggle the phase label between A-B-C
and L1-L2-L3.
6. Push  to confirm the selection.
Shop for Fluke products online at:
C/L3 N
blue white
blue white
grey blue
blue black
red blue
MyFlukeStore
www.
Date/Time Zone
The logger stores the measurement data in universal time
coordinate (UTC) to ensure continuity in time and accounts
for time changes due to daylight saving time (DST).
To display the time stamps of the measurement data
correctly, it is required to set the time zone. The Logger
adjusts automatically to DST. For example, a 1-week
measurement started on 2-Nov-2013 8:00 am ends on
9-Nov-2013 08:00 am even though the clock was set back
on 3-Nov-2013 from 02:00 to 01:00.
To set the time zone:
1. Push .
2. Push  to highlight or touch Time Zone target.
3. Push .
4. Select the regions/continents.
5. Push .
6. Continue to select the country/city/time zone until the
time zone configuration is done and the Instrument
Settings menu shows.
To set the date format:
1. Push  to highlight the Date Format target.
2. Push .
3. Select one of the available date formats.
1.877.766.5412
.com
Energy Logger
Function Selection Buttons
31