90° Door Swing - GE Side by Side Refrigerators Installation Instructions Manual

Top View
90° DOOR SWING
(optional setting)
Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS:
Dispenser models are supplied
with two dispenser trims, one to fit
framed panels and one for overlay
panels. Dispenser trim fit to the
custom panel depends on correct
panel thickness. Framed panels
must be 1/4" nominal. Overlay panels
should be constructed as shown to
accomplish a total 1.100" thickness.
See pages 7 and 8 for details.
Design Guide
Refrigerator
Door
5
Frameless Cabinets:
The case trim overlaps
cabinets at the top
and sides. Therefore,
frameless cabinets may
require filler strips to
Case Trim
prevent interference
with cabinet door swing.
The opening must allow
for filler strips.
23-7/8"
From Rear of
Refrigerator
1/4"
1/2"
1/4"
1/2"
3/4"
1"
1-1/4"
3/4"
1"
1-1/4"
1-1/2"
3/4" Overlay
Panel
(Nominal Size)