Table of Contents
Advertisement
1. Partially insert the oven in the
cabinet (approx. 30 cm) and
access the gas train from above.
Make the gas connection,
choosing from one of the two
systems:
a) flexible metal tube (Fig 22),
limited to those not longer than 2
m: screw the union onto the 1/2
gas train, inserting the gasket,
which is included in the bag of
accessories.
b) rigid metal pipe (Fig. 23)
(annealed copper Ø 8mm): insert
the copper pipe in the gas train
union after positioning the nut and
double cone, which are included
in the bag of accessories.
2. To complete the connection, tighten
the nuts with a 24 mm wrench,
taking care not to mechanically
stress the gas circuit (Fig. 24);
3. Insert the oven in the cabinet and
fix it as indicated in the section
"Fixing to the cabinet", making
sure the gas supply connection
pipe is not crushed.
IMPORTANT:
After installation, always check
the perfect seal of all unions using
a soapy solution. Never carry out
this check with a flame.
32
II
Fig. 22
Fig. 23
Fig. 24
FLEXIBLE
tube
Gasket
RIGID pipe
Nut
Double cone
Advertisement
Table of Contents
