Removing The Dimm And Battery From A Perc 5/E Adapter - Dell 5 series User Manual

Figure 3-5. Removing the PERC 5/E Adapter
bracket screw
NOTE:
For more information on removing peripherals installed in the system's PCI-E slots, see the Hardware
Owner's Manual that shipped with the system.

Removing the DIMM and Battery from a PERC 5/E Adapter

NOTE:
The TBBU on the PERC 5/E Adapter consists of a DIMM and battery backup unit.
This section describes how to remove the TBBU from a PERC 5/E Adapter that is currently installed in
a system.
1 Perform a controlled shutdown on the system in which the PERC 5/E Adapter is installed, as well as
any attached storage enclosures, and remove the PERC 5/E Adapter from the system by following the
instructions detailed in "Removing the PERC 5/E Adapter" on page 30.
2 Visually inspect the controller and determine whether the dirty cache LED on the DIMM is
illuminated. See Figure 3-6. If the LED is illuminated, reinsert the controller into the system, replace
the system cover, reconnect the system to power, turn the system on and repeat step 1.
battery
memory module
Hardware Installation and Configuration
PERC 5/E Adapter
31