Table of Contents
Advertisement
Figure 3-1. Installing a PERC 5/E Adapter
filler bracket
PCI-E slot
7 Tighten the bracket screw, if any, or use the system's retention clips to secure the controller to the
system's chassis.
8 Replace the cover of the system. See your system's Hardware Owner's Manual for more information on
closing the system.
9 Connect the cable from the external enclosure to the controller. See Figure 3-2.
Figure 3-2. Connecting the Cable From the External Enclosure
cable from the
external enclosure
10 Reconnect the power cable(s) and network cables, and then turn on the system.
26
Hardware Installation and Configuration
bracket screw
PERC 5/E Adapter
connector on the
controller
system
Advertisement
Table of Contents
