Main Screen - Mitsubishi Electric View Global+ User Manual

3. Main screen

Menu bar
Configuration
Add New Group:
Edit Schedule Setting:
Search Projector:
Assign IP:
Edit Projector Setting:
Edit E-mail Setting:
Search Projector Setting:
System Configuration:
Help
Tool bar
ProjectorView
Telnet
Visual PA2
Remote Controller
Refresh Status
Select All
You can specify the following settings:
You can create a new group.
You can edit schedule settings set for existing groups.
Automatically searches available projectors.
You can configure IP settings of the projector.
You can edit projector settings.
You can configure E-mail settings used for this application.
You can specify a search range for communication with the
projector via a router.
You can configure system settings of this application.
The version information is displayed.
You can control each projector separately using a Web browser.
(ProjectorView enabled projectors only.) In case of an error in the
projector, the details of the error are displayed. For details, see page
23.
You can make various settings using Telnet. (Telnet enabled projectors
only.) You can set the password, ProjectorView display language, LAN
control, and PJLink certification. For details, see page 23.
You can display a line of any text on the projector screen (Visual PA2
enabled projectors only). For details, see page 20.
Remote Controller window can be displayed to operate the projector.
You can turn on/off the power, and select the input source.
The current status of Power, Input Source, AV Mute, and Lamp Time 1/
2 (Low) of the projectors being displayed in the projector list can be
reacquired. The status of Input Source and AV Mute will not be
obtained under the following conditions:
• when the projector is powered off
• during warm-up or cool-down.
All projectors currently displayed on the projector list can be set to
selected/non selected state.
EN-6