Other Functions; Switching To Standby Mode; Dimming The Display Screen; Setting The Sleep Timer - Yamaha DVX-1000 Owner's Manual

■ Switching to standby mode

Press STANDBY/ON on the front panel or STANDBY/
ON (
) on the remote control.
→
The display screen goes blank.

■ Dimming the display screen

In any active mode, press DIMMER on the remote control
to select the desired brightness:
DIM 1: 70% brightness
DIM 2: 40% brightness
DIM OFF: normal brightness

■ Setting the sleep timer

The sleep timer switches the receiver to Eco Power
standby mode automatically at the preset time.
1 Press SLEEP on the remote control until "
appears in the display panel (
OFF).
2 To select the next sleep timer value, continue pressing
SLEEP while in sleep timer mode until the desired
turn-off time is displayed.
→
" " appears in the display panel, except
SLEEP
when " " is selected.
SLEEP OFF
→
Before the receiver switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
→
" " "
SLEEP 10 SLEEP 9
→
" " "
SLEEP 2 SLEEP 1
To cancel the sleep timer
Press SLEEP until "
SLEEP OFF
■ Recording on an external AV
component
1 Connect the external recording component to LINE
OUT (see "Connecting external AV components" on
page 18).
2 Select the source to record from this DVD receiver
(DVD/CD, TUNER, AUX or USB) and start playback
(if necessary).
3 Start recording on the external recording device.
Note
Refer to the owner's manual of the connected
component for details.

Other functions

SLEEP XX
: 15, 30, 45, 60 or
XX
→
"....
"
" appears.
"
6
49
En