Digital home theater component, digital sound projector, digital audio server, digital audio terminal, optional speaker system, plasma display monitor, digital cinema projector, digital home theatre receiver, dvd player, dvd changer, home theatre speaker (44 pages)
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of...
Page 3
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged...
Page 4
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product is a DVD home theater sound system consisting of the components shown on the table. Please check to make sure that all of the components listed in the table are included.
Page 5
YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
In a few steps, a whole new world of DVD will open up. Settle into your favorite place on the sofa and let the show begin. LET’S GET THINGS READY! ➡ Page 6, “Preparation” Decide on a place for the speakers, perform a few simple connections, and that’s all there is to it.
Page 7
Enjoy playing ➡ Page 28, “Playing Video and Music Discs” In 3 short steps, play everything from commercial CDs to your own homemade discs. Connect Speakers Play a disc Select a sound field • Enjoy playing all types of discs including audio and video CDs, Super Audio CDs and MP3 music recorded on CD-Rs.
CONTENTS Basic Playing back a DVD Advanced Preparation Introduction Page 6 About this Manual Page 6 Supplied Accessories Page 6 Preparing the Remote Control Page 7 Preparing the Speakers Page 7 Placing the Speakers Page 7 Connecting the Speakers and TV Page 8 Basic Operations Viewing a DVD Page 10 Useful Features Page 13...
Page 9
Listening to the Radio Connecting the Antennas Page 38 Connecting the FM Antenna Page 38 Connecting the AM Loop Antenna Page 38 Listening to the Radio Page 39 Selecting the Radio Tuner Page 39 Selecting Radio Stations Page 39 Setting Channels in Advance (Preset) Page 41 Selecting a Preset Station (Preset Tuning) Page 43 Changing the Order of Preset Stations Page 43 Receiving RDS Stations...
DVD/Super Audio CD Receiver (DVR-S200) 1 unit Speaker Set (NX-P200) Explanations in this Owner’s Manual are based on the DVX-S200 (DVD/Super Audio CD Receiver (DVR-S200) and Speaker Set (NX-P200)). If you use speakers other than NX-P200, make sure to set the speaker size and volume level in advance.
Preparing the Remote Control Put the batteries in the Remote Control. Check +/- polarity Press h Preparing the Speakers The Front Speakers, Surround Speakers, Center Speaker and Subwoofer have special roles based on the type of sound each produces. • The Front Speakers produce front channel sound (stereo) and sound effects. •...
Preparation Connecting the Speakers and TV Please ... Connect the power cord after connecting the speakers and TV. Connect the cable core with the color band near the tip to the + connector. Be careful, if you reverse the cables, the sound will be unnatural.
Center Speaker Speaker Cable (Green) Connect the power cord after making all other connections. DVD/Super Audio CD Receiver SPEAKERS FRONT CENTER FRONT SURROUND SURROUND SPEAKER IMPEDANCE: 6 MIN. Speaker Cable (Blue) Surround Left Speaker Connect the power cord after making all other connections.
Basic Operations Viewing a DVD It’s time to play a DVD. Select a disc and begin from step 1. Turn on the TV. Use the TV remote control or power switch. Press POWER. DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE SELECT MATRIX 6.1 STEREO...
Page 15
Place a disc in the tray. Please ... • Place the disc with the label side facing up. • Hold the disc by its edge and hole in the center to avoid touching the surface of the disc. Press DVD/CD. DVD/CD VIDEO 1 MD/CD-R...
Page 16
Basic Operations Press p. TV CH A B C D E PRESET ON SCREEN ENTER STATUS TV VOL The DVD starts playing. A B C D E Press POWER to turn off. DVR-S200 WB56620 POWER AUDIO /DTS SELECT NIGHT TV INPUT TV CH A B C D E Eject the disc before turning off...
Useful Features Handy Features Selecting the Audio Language 1 While holding down SHIFT, press AUDIO. 2 While viewing the TV screen, press h or g to select the audio language you want. The audio language changes each time you press AUDIO while holding down SHIFT.
Basic Operations Useful Features Handy Features Handy Features Switching the Viewing Angle While holding down SHIFT, press ANGLE. The video angle changes each time you press ANGLE while holding down SHIFT. Advice • You can change the angle with h, g, or Number buttons, instead of ANGLE.
Useful Features Try It Out! Enhancing the Sound Presence CinemaStation is loaded with a variety of DSP Programs, so you can experience from the raw excitement of a rock concert to the breathtaking space of a cinemagraphic spectacle. See page 16, “Finding the Best DSP Effect”. Turning off the Sound Press MUTE on the Remote...
Sound Presence Finding the Best DSP Effect Changing the DSP effect based on listening and viewing content Select a DSP Program for the movie or music and experience the sound of a movie theater or concert hall. Follow the chart below to select the DSP Program that offers the acoustic qualities you want.
Page 21
Finding the right DSP Program Action Enhances the stereoscopic effect for a thrilling sense of presence only found in an action movie. Drama Expresses surround sounds softly so that voice and dialog are clear and crisp. Sci-Fi (Science Fiction) Fills the space with music and sound that have an eerie sense of reality.
Advanced Features Names and Functions of Parts Top and Front Buttons for amplifier and disc operations t/e, r/y Selects the previous/next track or chapter. Continue pressing to fast forward or fast reverse. PROGRESSIVE (NTSC only) Switches DVD playback between progressive and interlace outputs.
Page 23
Buttons for tuner operations Press INPUT on CinemaStation or press TUNER on the Remote Control to select Tuner mode. In Tuner mode, the buttons below function as described. d PRESET/TUNING u Selects a Preset Number. Searches a radio station. (See page 39.) About memory backup If you disconnect the power cord from the outlet, CinemaStation will memorize the settings listed to the...
Advanced Features CinemaStation Display PROGRESSIVE Lights up when PROGRESSIVE is activated. Decoder indicator Lights up when an internal decoder is working. DIGITAL MATRIX TITLE TRACK CHAP PROGRESSIVE 888888888888 DVD VCD Program, Repeat indicator PROG: Lights up during Program Play. REP: Lights up during Repeat Play of a title, chapter or track.
Remote Control Features CinemaStation DVD/CD FM/AM Decoder selection Playback Radio station SET MENU Subtitles, audio reception language selection Radio station preset Amp mode Tuner mode DVD/CD mode DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR...
Advanced Features Amp Mode Button Names and Functions q/DTS, SELECT Switches between Dolby Digital and DTS decoders. After pressing q/DTS, repeatedly press SELECT to select a decoder. (See page 74.) Infrared signal transmitter Sends an infrared signal to the CinemaStation. POWER (a/I)* Switches the CinemaStation between ON and STANDBY.
DVD/CD Mode Button Names and Functions Number buttons (1-9, 0) Input numerals for track numbers and others. w, f Fast forwards and reverses. b, a (Skip) Moves to the start of a disc track. ON SCREEN Shows the On Screen Menu on the TV. (See pages 24 and 93.) STATUS Shows type of disc, play/stop status, playing time...
Advanced Features Using the On Screen Menu ON SCREEN MENU SCREEN SET MENU ENTER STATUS RETURN TEST TV VOL VOLUME MUTE DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS GAME CINEMA Program Preferences View Toolbar Play Option Setup Search On Screen Menu The On Screen Menu includes Preference, Toolbar and Setup.
Page 29
Press h or g to navigate the Main Menus, then press w. Preference Toolbar Setup Refer to On Screen Menu Guide on pages 95 and 96. On Screen Menu Press h or g to navigate the Submenus, then press w. Features Picture Program...
Selecting the Media Device Selecting the Equipment What would you like to play? Play video Video discs Music CDs, MP3 discs or Super Audio CDs FM/AM radio Video tape Video game or video camera CinemaStation provides you with a variety of playback options, including video discs, music CDs and MP3 discs.
Making the connections Complete the steps on pages 8 and 9, “Connecting the Speakers and TV”. Complete the steps on pages 8 and 9, “Connecting the Speakers and TV”. Then connect the indoor FM Antenna and AM Loop Antenna to CinemaStation.
Playing Video and Music Discs Playback Methods DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS GAME CINEMA DVD/CD Selecting a Scene or Tune DVR-S200 WB56620 POWER AUDIO ANGLE /DTS SELECT MATRIX 6.1 REPEAT NIGHT CENTER SHIFT TV INPUT TV CH A B C D E SLEEP...
DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SET MENU ENTER STATUS RETURN TEST TV VOL VOLUME MUTE DVD/CD...
Playing Video and Music Discs DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SCREEN ENTER STATUS RETURN TEST VOLUME...
Customizing Playback Order (Program Play) DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SCREEN SET MENU ENTER RETURN STATUS...
Page 36
Playing Video and Music Discs DVR-S200 WB56620 POWER AUDIO ANGLE /DTS SELECT MATRIX 6.1 REPEAT NIGHT CENTER TV INPUT TV CH A B C D E SLEEP PRESET ON SCREEN SCREEN ENTER STATUS TEST VOLUME TV VOL MUTE DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2...
Page 37
Check Program Play content ON SCREEN MENU SCREEN SET MENU ENTER STATUS RETURN TEST Turn on/off Program Play ON SCREEN MENU SCREEN SET MENU ENTER RETURN STATUS TEST Delete Program Play ON SCREEN MENU SCREEN SET MENU ENTER RETURN STATUS TEST Perform steps 1 to 2 in “Customizing Playback Order (Program Play)”...
Playing Video and Music Discs Repeating a Disc or Track (Repeat Play) DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN ENTER...
Page 39
Repeat between two points (A-B Repeat) DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SET MENU ENTER RETURN STATUS...
Playing Video and Music Discs Using a Disc Menu Using a Disc Menu Navigate a DVD Disc Menu ON SCREEN ENTER STATUS ENTER TEST TV VOL VOLUME MUTE DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS CINEMA Use Video CD Playback Control (PBC) (Menu Play) DVR-S200 WB56620 POWER AUDIO...
MP3 Playback Features Root : Album (Folder) : Track (File) Notes • Depending on the way you assign folder or file names when you record the MP3 disc, the CinemaStation may play tracks in a different order from the order they were recorded in. •...
Advice • The AM Loop Antenna can be detached from its stand and attached to a wall. • To improve reception, we recommend that you install an outdoor antenna. For details, contact your local Yamaha sound products service center. Notes •...
Listening to the Radio CinemaStation provides several methods for tuning radio stations to help you find channels as easy as you can. Selecting the Radio Tuner INPUT Display Selecting Radio Stations Select stations automatically (Auto Tuning) d PRESET/TUNING PRESET/BAND AUTO/MAN’L Display PRESET/TUNING u Preset number...
Page 44
Listening to the Radio Select your favorite stations by hand (Manual Tuning) d PRESET/TUNING PRESET/BAND AUTO/MAN’L Display PRESET/TUNING u Advice • If the radio waves are weak and Auto Tuning doesn’t work, tune manually (Manual Tuning). • When Auto Tuning finds a radio station, the TUNED indicator lights up and the frequency appears. •...
Setting Channels in Advance (Preset) Automatically preset FM stations in advance (Auto Preset) A/B/C/D/E PRESET/BAND MEMORY Display AUTO/MAN’L PRESET/TUNING u d PRESET/TUNING Presetting radio stations in memory helps you tune the preset radio stations using a few simple button operations. ✕...
Page 46
Listening to the Radio Manually preset stations in advance (Manual Preset) MEMORY A/B/C/D/E Display PRESET/TUNING u d PRESET/TUNING Advice • When presetting a radio station, you can set the frequency and reception mode (stereo/monaural) at the same time. • You can change the order of preset FM radio stations later. See page 43, “Changing the Order of Preset Stations”. •...
Selecting a Preset Station (Preset Tuning) DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET PRESET ON SCREEN MENU SET MENU ENTER STATUS RETURN...
Listening to the Radio Receiving RDS Stations (U.K. and Europe models only) DVR-S200RDS WB56630 POWER AUDIO ANGLE SELECT MATRIX 6.1 /DTS REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET PRESET d PTY SEEK FREQ/RDS MODE FREQ/RDS ON SCREEN ENTER...
Page 49
Change RDS Mode There are four RDS display modes. When an RDS station is broadcasting, PS, PTY, RT or CT mode indicators corresponding to the services provided light up in the CinemaStation Display. Press FREQ/RDS repeatedly to change among the modes supported by the currently tuned RDS station.
Using Other Equipment Connecting Video Equipment Connecting a Game Console or VCR Connection Cables Use a commercially available Audio/Video cable. Use the supplied Video Pin Cable. Use a commercially available optical cable Audio/Video cable (commercially available) Video Pin Cable (supplied) Optical cable (commercially available) INPUT VIDEO...
Page 51
Notes on the audio jacks Notes on recording and playing video Connect a game console to a digital input Connect a TV to an audio input OUTPUT VIDEO AUDIO VIDEO CinemaStation VIDEO 1 VIDEO 2 • You cannot simultaneously use both IN and OUT jacks when the jack names are the same as each other.
Using Other Equipment Operating a VCR DVR-S200 WB56620 POWER POWER POWER AUDIO ANGLE SUBTITLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS GAME CINEMA Playing a Video Game or Operating a Video Camera DVR-S200 WB56620 POWER POWER...
Dubbing from a Video Camera to a VCR DVR-S200 WB56620 POWER POWER POWER SUBTITLE AUDIO ANGLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS GAME CINEMA Connecting with SCART cable (U.K. and Europe models only) Do not connect CinemaStation to a monitor via a VCR.
Using Other Equipment Connecting Audio Equipment Connecting a CD or MD Recorder Connection Cables Use a commercially available Audio Pin Cable. Use a commercially available Optical Cable Audio Pin Cable (commercially available) Optical Cable (commercially available) INPUT OUTPUT COMPONENT VIDEO S VIDEO (480p/480i) (DVD ONLY)
Page 55
Notes on the digital audio jacks DVD/CD VIDEO 1 VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS GAME MD/CD-R CINEMA • The digital jacks are compatible with PCM, Dolby Digital and DTS signals. • The OPTICAL IN jack is compatible with a digital signal that has a 96 kHz or less sampling frequency.
Page 56
Using Other Equipment Notes on recording and playing audio • Perform a test recording before recording. • It is not possible to record DSP effects. • CinemaStation cannot output a Super Audio CD signal to the OPTICAL OUT jack. To record a Super Audio CD signal, connect external devices (such as CD or MD recorder) to the analog output jacks and use it to record the signal.
Playing a CD or MD DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MD/CD-R MOVIE MUSIC SPORTS GAME CINEMA Recording Audio from CinemaStation DVR-S200 WB56620 POWER POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT DVD/CD VIDEO 1 MD/CD-R...
Creating the Best Listening Space Placing the Speakers (NX-P200) Placing the Center Speaker Peel off the seal Placing the Subwoofer To get the most out of the sound field effects you need to place the speakers in the best positions. To guard against poor acoustics like sound blur make sure the speakers are stable.
• CinemaStation may fall over if your feet or hands get caught in the speaker cable. Make sure the cables are fixed in place. • After attaching everything, check the overall safety of your installation. YAMAHA will bear no responsibility for accidents caused by improperly placed equipment or faulty installation methods. You can place the Front Speakers and Surround Speakers on the floor or a rack, or attach them to a wall.
Page 60
Creating the Best Listening Space When attaching to a speaker stand and bracket 60 mm Use the supplied screw to attach the mounting bracket to the bottom of the speaker. Mounting bracket The jutting part of the bracket enters the groove at the (supplied) speaker base.
Yamaha Speaker Stand SPS-200 (Option) With the SPS-200 Speaker Stands, you can set the Front Speakers and Surround Speakers on the floor. (2 stands/set) * SPS-200 stands may not be available in certain regions. Using Commercially Available Speakers or Cables...
Page 62
Creating the Best Listening Space Changing the speaker cables Push up the release button and pull out the supplied speaker cable from the connector. Release button Peel away about 10 mm of covering from the tip of the commercially available cable and firmly twist the cable cores.
Adjusting the Speaker Volume Level Adjusting the Speaker Balance with a Test Tone DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN...
Page 64
Creating the Best Listening Space LEFT CENTER SUBWOOFER L SUR. Advice • If you raise the volume level of the Center and Surround L/R Speakers to + 10 dB and this is still less than the Front Speakers, set the “* F. Level” in the SET MENU to -10 dB and lower the volume level of the Front Speakers by about 1/3. If you change the volume level of the Front Speakers, adjust the volume level of the Center and Surround L/R Speakers once again.
Adjusting the Speaker Volume Level During Playback DVR-S200 WB56620 POWER POWER CENTER AUDIO ANGLE SUBTITLE + / – /DTS SELECT MATRIX 6.1 STEREO REPEAT SURR NIGHT SW + / – CENTER SURR + / – SHIFT TV INPUT TV CH A B C D E SLEEP PRESET...
Page 66
Creating the Best Listening Space Adjust speaker volume for 5ch Stereo DSP Program DVR-S200 WB56620 POWER AUDIO ANGLE /DTS SELECT MATRIX 6.1 REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET ON SCREEN ENTER STATUS TEST VOLUME TV VOL MUTE...
(Front, Center, Surround and Subwoofer). But depending on your listening objectives, you can turn off specified speakers. When using any speaker other than YAMAHA Speaker Set NX-P200, you need to specify the speaker size. You can specify these settings in Speaker mode.
Page 68
Creating the Best Listening Space * CENTER Sets whether the Center Speaker is present or not, and sets the size of the Center Speaker. Selection items: LRG (Large), SML (Small), NON (None) Default setting: SML LRG: Select this setting when using a big Center Speaker.
Selecting DSP Program Effects To get the most out of CinemaStation, select a sound field based on how many speakers you want to use and the listening environment. Select a sound field based on how many speakers you want to have sound. •...
Page 70
More Information about DSP (Surround) Effects Advice • When the Matrix 6.1 decoder is working, the MATRIX indicator lights up in the CinemaStation Display. 6.1 appears beside the DSP Program name (For example: Action 6.1). Matrix 6.1 appears with Dolby Digital and DTS sound fields. Notes •...
Using All Speakers for CD or Video Playback DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE SELECT q/DTS SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SET MENU ENTER...
Page 72
More Information about DSP (Surround) Effects Change the Dolby Pro Logic II Music setting DVR-S200 WB56620 POWER AUDIO ANGLE /DTS SELECT MATRIX 6.1 REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET ON SCREEN ENTER STATUS TEST TV VOL VOLUME...
Using Front Speakers Only for DSP Program (Virtual Cinema DSP) DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SET MENU SET MENU...
More Information about DSP (Surround) Effects Using a DSP Program with Headphones (“SILENT CINEMA”) STATUS RETURN TEST TV VOL VOLUME MUTE DVD/CD VIDEO 1 MD/CD-R TUNER VIDEO 2 MOVIE MUSIC SPORTS GAME CINEMA Advice • When “SILENT CINEMA” is on, the “SILENT CINEMA” indicator lights up in the CinemaStation Display. •...
Using a DSP Program with Low Volume (Night Listening) DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SET MENU ENTER...
More Information about DSP (Surround) Effects Changing the Delay Time of a DSP Program DVR-S200 WB56620 POWER AUDIO ANGLE q/DTS SELECT MATRIX 6.1 /DTS REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET ON SCREEN ENTER STATUS TEST TV VOL...
Page 77
Default values for Delay Time Program Program Name Group MOVIE Action Action 6.1 Drama Drama 6.1 Sci-Fi Sci-Fi 6.1 Spectacle Spectacle 6.1 Theater Theater 6.1 MUSIC 1 Music Video 2 Classic Hall 3 Jazz Club 4 Rock Concert SPORTS 1 Live Sports GAME 1 Game More Information about DSP (Surround) Effects...
More Information about DSP (Surround) Effects Reproducing the Original Dolby and DTS Sound DVR-S200 WB56620 POWER AUDIO ANGLE q/DTS SELECT MATRIX 6.1 /DTS REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET ON SCREEN ENTER STATUS TEST TV VOL VOLUME...
Reproducing Stereo Sound DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SET MENU ENTER STATUS RETURN TEST TV VOL VOLUME...
Types of Input Signals Types of Input Signals Checking Sound Information (Input Signal Information Display) DVR-S200 WB56620 POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 REPEAT NIGHT CENTER SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN ENTER...
Page 81
Input signal information (Format) Shows the input signal format. When the digital input cannot be recognized, the mode is set to analog. Input Signal Format Display Analog Audio Analog PCM Audio Dolby Digital Audio Dolby DGTL DTS Audio Other Digital Signals Unknwn DGTL (Audio Channels) Shows the number of audio channels an input signal...
Types of Input Signals Switching Input Modes DVR-S200 WB56620 POWER AUDIO ANGLE SELECT MATRIX 6.1 /DTS REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET ON SCREEN ENTER STATUS TV VOL MUTE DVD/CD MD/CD-R TUNER MOVIE MUSIC SPORTS CINEMA...
Using the Sleep Timer After a specified time the power automatically enters standby so you can enjoy CinemaStation until you fall asleep. DVR-S200 WB56620 POWER POWER SUBTITLE AUDIO ANGLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP...
THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR VIDEO MONITOR COMPATIBILITY WITH THIS UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. This unit is compatible with the complete line of YAMAHA projectors, including the DPX-1, LPX-500, DPX-1000 and with the YAMAHA PDM-1 plasma display.
Protecting Your Children from Undesirable Material You can cut a scene that you do not feel it is suitable for your children, or lock a disc from being played. CinemaStation allows you to set the level of Parental Control. It then checks the level of a disc whose level has been set in advance and automatically decides if the content is suitable for viewing by your children before playing.
Page 86
Additional Features DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SCREEN SET MENU ENTER RETURN STATUS TEST VOLUME TV VOL...
Locking a Disc DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET PRESET ON SCREEN MENU SCREEN SET MENU ENTER STATUS RETURN TEST TV VOL...
Operating Other Equipment with the CinemaStation Remote Control Storing Manufacturer Codes in the Remote Control Setting the Manufacturer Code DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE /DTS SELECT MATRIX 6.1 STEREO REPEAT NIGHT CENTER SURR SHIFT TV INPUT TV CH A B C D E SLEEP PRESET...
When the Remote Control’s TV, VCR or MD/ CD-R button does not work even after setting the device manufacturer code Try again from step 1 and keep the following points in mind. • Make sure you select the Remote Control’s TV, VCR or MD/CD-R button correctly when setting the manufacturer code.
Page 90
Operating Other Equipment with the CinemaStation Remote Control Channel Selection (+) Channel Selection (-) VCR Rewind Volume (+) Volume (-) While you set the VCR manufacturer code for the VCR button or the MD/CD-R button, you can operate your VCR. Pause Reverse Search Reverse Skip...
Manufacturer Code List Depending on the model and year, you may not be able to use some manufacturer products. In this case, use the remote control supplied with each product. Manufacturer Manufacturer Code Yamaha 299/292 Admiral 292/293 Aiko Aiwa 294/276/283...
Page 92
Operating Other Equipment with the CinemaStation Remote Control Manufacturer Manufacturer Code Yamaha 399/392/393/394 Admiral Aiwa 396/397/398/329/339 Akai 322/323/324 Asha Audio Dynamic 392/394 Audiovox Beaumark Bell & Howell Blaupunkt 325/326 Brocsonic Bush Calix Candle 335/363/396 Canon 325/328 396/332 Citizen Craig 396/363...
Using the SET MENU You can use the SET MENU to adjust settings, including Speaker settings. Change the settings to match your listening environment. SET MENU List Advice • Even during playback you can change settings in the SET MENU. •...
Using the SET MENU Navigating the SET MENU DVR-S200 WB56620 POWER AUDIO ANGLE /DTS SELECT MATRIX 6.1 REPEAT NIGHT CENTER SHIFT TV INPUT TV CH A B C D E SLEEP PRESET ON SCREEN ENTER STATUS TEST TV VOL VOLUME MUTE DVD/CD VIDEO 1...
Page 95
Adjust the playback level of the LFE signal (* LFE Level) You can adjust the LFE channel output level while playing a Dolby Digital or DTS signal. Adjust the LFE level to match the performance of the Subwoofer and headphones. Submenu: SP LFE, HP LFE Variable range (dB): -20 to 0 dB.
Page 96
Using the SET MENU Set the dynamic range during Dolby Digital playback (* D. Range) You can select the dynamic range (spread between the max. and min. volume) of Dolby Digital playback from 3 levels. Submenu: SP D.R, HP D.R Selection items: MAX (Maximum), STD (Standard), MIN (Minimum) Default setting: MAX...
Using the On Screen Menu You can use the On Screen Menu to adjust settings for DVD playback, including picture and language settings. Navigating the On Screen Menu DVR-S200 WB56620 POWER POWER AUDIO ANGLE SUBTITLE SELECT MATRIX 6.1 STEREO /DTS REPEAT NIGHT CENTER...
Page 98
Using the On Screen Menu DVR-S200 WB56620 POWER AUDIO ANGLE SELECT MATRIX 6.1 /DTS REPEAT NIGHT CENTER TV INPUT TV CH A B C D E PRESET ON SCREEN SCREEN ENTER STATUS TV VOL MUTE DVD/CD MD/CD-R TUNER MOVIE MUSIC SPORTS CINEMA Press w to enter menu items.
On Screen Menu Guide Main Menu Submenu Features Preference Picture Program Toolbar View Play Option Search Setting Item Status window Set to “On” to turn on/off the status display using the STATUS button on the Remote Control. The status display includes the type of disc, the currently playing track/chapter number, the total time of track/chapter and the elapsed time of track/chapter.
Page 100
Using the On Screen Menu Main Menu Submenu Setup Access Language Audio Menu Features Be careful when setting this menu item. If it does not match your TV, the menu and playback screen will not appear properly or will not appear on the TV. If that happens, refer to “Recover TV settings” below. This unit can play PAL and NTSC, but your television must match the system used on the disc.
CinemaStation power, remove the power plug from the outlet and contact the store where you purchased the product or your nearest YAMAHA sound products service center and ask for assistance.
Page 102
Appendix No sound except from the Front Speakers. 1 You are listening to STEREO sound. Cause Press STEREO and make sure sound field Solution effect is on. 2 You are playing a source such as Dolby Cause Surround, Dolby Digital or DTS that doesn’t contain a special effect signal.
Page 103
Sound volume will not increase. The power of the device connected to Cause CinemaStation’s output jack is not turned If the power of the device connected to the Solution output jack is not turned on, playback may be distorted and volume low. Turn on the power of the connected device.
Appendix Disc Playback One of the buttons doesn’t work. Some discs do not allow certain operations. Cause Playback does not start when pressing w, or it immediately stops. 1 When moved from a very cold place to a Cause warm one, condensation forms on the lens. Solution Do not use for 1 to 2 hours.
The disc is ejected as soon as it is inserted. A disc that cannot be played has been Cause inserted. Radio Reception FM/AM Preset Tuning does not work. 1 The Preset (memory) has been deleted. Cause Perform the Preset operation again. See Solution page 41.
Appendix Remote Control The Remote Control does not work. 1 You are outside the Remote Control Cause operating range. Operate the Remote Control within 6 m (20 Solution feet) and a 30° angle of the Remote Control Sensor. 2 The Remote Control Sensor is exposed to Cause direct sunlight or lighting (inverted fluorescent lamps).
Information Disc information The table below lists the types of discs you can play on CinemaStation. Video Discs Type of Disc DVD Video SVCD (Super Video CD) Video CD DVD region codes The region code (an ID number assigned to each market region) is set for normal DVD players and DVD video discs.
Appendix Notes • The following discs cannot be played with this unit. CD-ROM, DVD-ROM, DVD-RAM, CDV. • CinemaStation cannot play a CD-R, CD-RW, DVD-R, DVD- RW, DVD+R or DVD+RW disc that has not been finalized. Finalizing is a process that prepares a disc for playback on a compatible device.
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. “SILENT CINEMA” is a trademark of YAMAHA CORPORATION. Active Servo Processing Subwoofer System with a built-in power amplifier...
Yamaha Cinema DSP applies original sound field technology based on a wealth of real-world data measurements to reproduce Dolby Pro Logic, Dolby Digital and DTS sound, combining them with acoustic scale, depth and tone so that you can experience the presence of a movie theater at home.
Page 111
And the higher the quantized bit rate the finer the sound that can be reproduced. “SILENT CINEMA” “SILENT CINEMA” is an original Yamaha system that reproduces in a pair of headphones the acoustic personality of sound field programs based on multi- speakers.
Appendix Index 5ch Stereo ... 17 A-B Repeat ... 35 Action ... 17 Changing the Order of Preset Stations ... 43 CinemaStation Display brightness ... 92 Classic Hall ... 17 Connecting a CD or MD recorder ... 50 Connecting a Game Console ... 46 Connecting a VCR ...
Page 113
SA-CD Delay ... 91 Sci-Fi (Science Fiction) ... 17 Selecting Radio Stations ... 39 Auto Tuning ... 39 Manual Tuning ... 40 Preset Tuning ... 43 SET MENU ... 91 Setting Channels in Advance (Preset) ... 41 Auto Preset ... 41 Manual Preset ...
Woofer: 5 cm (2 inch) cone magnetic shielding type Impedance ... 6Ω Subwoofer Model Name ... NX-SW200 Type ... Advanced YAMAHA Active Servo Technology system Driver ... 20 cm (8 inch) cone, magnetic shielding type GENERAL Power Supply U.S.A. and Canada models ... AC 120 V/60 Hz Australia model ...
Page 115
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Malaysia WB85540-3 YAMAHA MUSIC AUSTRALIA PTY, LTD.