Generator Shutdown Procedure - MULTIQUIP POWER WHISPERWATT DCA-25SSI2 Parts And Operation Manual

ENGINE SHUTDOWN
To shutdown the generator, use the following procedure:
1. Switch both the MAIN, GFCI and LOAD circuit breakers
(Figure 52) to the "OFF" position.
Figure 52. Main, GFCI and Load
circuit breakers
2. Set the engine throttle lever to (low) position.
3. Let the engine cool by running it for 3-5 minutes with no
load applied.
4. Turn the ignition key to 'STOP' (Figure 53).
Figure 53. Ignition Switch 'STOP'
5. Remove the load from the UNV terminal strip.
PAGE 46 — DCA-25SSI2 — PARTS AND OPERATION MANUAL— FINAL COPY (06/29/01)
DCA-25SSI2 — GENERATOR SHUTDOWN PROCEDURE