Setting Your Changes As A New Default; Restoring All Settings To The Factory Default - Brother MFC-J625DW Advanced User's Manual

Hide thumbs Also See for MFC-J625DW:
Table of Contents

Advertisement

Printing photos from a memory card or USB Flash memory drive (MFC-J625DW and DCP-J725DW only)
f
If you do not want to change additional
settings, press
Press Start to print.
Note
The DPOF setting on your camera must
be turned off to use the Date Print
feature.
Setting your changes as a
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will remain until you change
them again.
a
Press your new setting.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
s or t to choose Set New Default.
c
Press Set New Default.
d
Press OK.
The LCD asks you again to confirm if
you set the change as the new default.
Press Yes.
e
Press Stop/Exit.
.
8
Restoring all settings to the
factory default
You can restore the PhotoCapture settings
you have changed back to the factory default
for, Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Date Print.
a
Press
(PHOTO) or Photo.
Do one of the following:
Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
Press Print All.
b
Press Options.
c
Press s or t to display
Factory Reset.
d
Press Factory Reset.
e
Press Yes to confirm.
f
Press Stop/Exit.
8
8
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-j525wDcp-j725dw

Table of Contents